Where To Put Your Machine; Machine Environment - Ricoh Priport DX 4640PD Operating Instructions Manual

Where to Put Your Machine

Machine Environment

Your machine's location should be carefully chosen because environmental con-
ditions greatly affect its performance.
Optimum environmental conditions
R CAUTION:
• Keep the machine away from humidity and dust. Otherwise a fire or an elec-
tric shock might occur.
• Do not place the machine on an unstable or tilted surface. If it topples over,
an injury might occur.
R CAUTION:
• Make sure the room where you are using the machine is well ventilated and
spacious. Good ventilation is especially important when the machine is used
heavily.
R CAUTION:
• After you move the machine, use the caster fixture to fix it in place. Other-
wise the machine might move or come down to cause an injury.
• Temperature: 10 – 30°C, 50 – 86°F
• Humidity: 20 – 90% RH
• A strong and level floor.
• The machine must be level within 5 mm, 0.2" both front to rear and left to
right.
Environments to avoid
• Locations exposed to direct sunlight or strong light (more than 1500 lux).
• Locations directly exposed to cool air from an air conditioner or heated air
from a heater (sudden temperature changes might cause condensation within
the machine).
• Places where the machine might be subjected to frequent strong vibration.
• Dusty areas.
• Areas with corrosive gases.
Where to Put Your Machine
6
201