Control Panel - Ricoh Priport DX 4640PD Operating Instructions Manual

Control Panel

1.
Screen contrast knob
Use to adjust the brightness of the dis-
play panel.
2.
{Image Position} key
Press to activate the position setting keys.
3.
{User Tools} key
Press to change the default settings to
meet your requirements.
4.
Position Setting keys
Press to adjust the position of printed im-
ages.
5.
{Printer Settings} key
Press to change the default settings for
online printing.
6.
Indicators
M: Open Cover/Unit indicator. See p.174
"MWhen the Open Cover/Unit Indica-
tor Lights".
Let you know the status of the machine.
u: Key Counter indicator. The light
turns on when Key Counter mode is on
and [Restricted Access] is on in the settings
and the Key Counter or Key card is not
set. If [User Code Management] is On, The
light turns on when the user code entry
screen is displayed. See p.188 "Adminis-
trator Tools"
j: Add Ink indicator. See p.152 "jAd-
ding Ink".
C: Master End indicator. See p.154
"CReplacing the Master Roll".
B: Load Paper indicator. See p.150
"BLoading Paper".
k: Master Eject indicator. See p.175
"kRemoving the Used Master".
x: Misfeed indicator. See p.157 "x
Clearing Misfeeds".
7.
{Check Modes} key
Press this key to check settings.
8.
{Program} key
Press to register frequently used settings,
or to recall registered settings.
9.
{Clear Modes} key
Press to clear previously entered print job
settings.
10.
{Hold Data-in} key
Press to reject the online print temporarily.
11.
{Master Making} mode select key
Press to select the master making mode.
12.
{Auto Cycle} key
Press to make masters and prints in a sin-
gle operation.
13. {Print} mode select key
Press to select the print mode.
14.
Main power indicator
The main power indicator lights up when
the main switch is turned on.
AUX201S
21