Ricoh Priport DX 4640PD Operating Instructions Manual page 204

User Tools
❖ Erase Original Border Width
You can specify the width of
erased border margins for origi-
nals using this function.
Note
❒ Default:
• Metric version: 2 mm
• Inch version: 0.1"
❖ Erase Paper Border Width
You can specify the width of
erased border margins for prints
using this function.
Note
❒ Default:
5
• Metric version: 2 mm
• Inch version: 0.1"
❖ Stamp Type Defaults
You can select the stamp message
at power on with the Stamp mode.
Note
❒ Default: CONFIDENTIAL
❖ Stamp Size
You can edit the preset stamp sizes.
Note
❒ Default: 1 X
❖ Stamp Density
You can select the density of the
stamps.
Note
❒ Default: Normal
192
❖ Stamp Position
You can set the position where the
stamp is printed.
Press the arrow keys to adjust the
position.
Note
❒ Default:
• Metric Version:
• Position: Top Right
• Top Margin: 24 mm
• Right Margin: 24 mm
• Inch Version:
• Position: Top Right
• Top Margin: 1.0"
• Right Margin: 1.0"
❖ Orientation: Booklet, Magazine
You can select the orientation of
prints to open when using Booklet
or Magazine mode.
Note
❒ Default: Open to Left
❖ Print Orientation in Duplex Mode
You can set the print orientation
when making duplex prints.
Note
❒ Default: Top to Top
❖ Copy Orientation in Duplex Mode
You can set the original orientation
when making duplex prints.
Note
❒ Default: Top to Top
❖ Front Margin: Left/Right
You can specify left and right mar-
gins on the front side of prints in
Margin Adjustment mode.
Note
❒ Default:
• Metric version: Left 5 mm
• Inch version: Left 0.2"