1.
Exposure glass cover (optional) or
Auto Document Feeder capable of
scanning both sides of a sheet
(ARDF) (optional)
Lower this cover over an original on the
exposure glass. If you have the ARDF,
load a stack of originals here. They will
be fed automatically, one by one.
(The illustration shows the ARDF.)
2.
Exposure glass
Position originals here face down for
printing.
3.
Main switch
Use to turn the power on or off.
4.
Paper alignment wings
Lift or lower the wings depending on the
type of paper being used.
5.
Paper delivery end plate
This plate aligns the leading edge of prints.
6.
Paper delivery end plate knob
Use to move the end plate.
7.
Paper delivery tray
Completed prints are delivered here.
8.
Paper delivery side plates
Use to align the prints on the paper deliv-
ery tray.
9.
Paper delivery side plate knobs
Use to move the side plates.
10.
Drum unit
The master is wrapped around this unit.
11.
Drum unit lock lever B1
Lower to unlock and pull out the drum unit.
AUX023S
15