Earth Plate Removal; Fan Unit Removal - Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Service Manual

Disassembly and Assembiy

3.2.2.6 Earth Plate Removal

1. Remove the rear cover. (Refer to Section 3.2.1.1.)
Remove the top cover. (Refkr to Section 3.2.1.2.)
2.
Remove the left cover. (Refer to Section 3.2.13.)
3.
Remove the right cover. (Refer to Section 3.2.1.4.)
4.
Remove the ELEC cover. (Refer to Section 3.2.2.1.)
5.
6.
7.
Remove 1 CB screw (M3 x 6) securing the earth wire of the earth plate on the LVPS unit.
Remove the link assembly. (Refer to Section 3.2.4.1.)
8.
9.
Remove 2 CBB screws (M3 x 8) securing the earth plate, and remove it.
Figure 3-12. Removing the Earth Plate

3.2.2.7 Fan Unit Removal

1. Remove the rear cover. (Refer to Section 3.2.l.l.)
2. Remove the top cover. (Refer to Section 3.2.l.2.)
3. Remove the leftcover. (Refer to Section 3.2.13.)
4. Remove the right cover. (Refer to Section 3.2.l.4.)
5. Remove the ELEC cover. @efertoSec tion3.2.2.l.)
6. Discomect connector P/J305 from the HVPSboard.
7. Remove 2 Cp($pl) screws (M3 x 30) securing the fan unit, and remove it
3-1o
Removing the Fan Unit
Assembly
Rev. A