Disassembly And Assembly; Housing Removal; Rearcoverremova; Top Cover Removal - Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Service Manual

Disassembly and AssembW

3.2 DISASSEMBLY AND ASSEMBLY

components of the EPL-9000. Cleanin g is described in Chapter 6. me assembly procedures are not
described, except for special notes where necessary, because assembly can be accomplished by
performing disassembly in reverse.

3.2.1 Housing Removal

3.2.1.1 Rear Cover Removal
1. Remove the option rnterface cover.
1 CBB screw (M3 x 8) securing the top cover.
2.
3. Remove 1 CB screw (M3 x 8) securing the rear cover, and remove it.

3.2.1.2 Top Cover Removal

1. Remove the rear cover. (Refer to Section 3.2.l.l.)
2. Remove 4 CB screws (h43 x 8) securing the top cover, and remove it.
3-4
Figure 3-1. Removing the Rear Cover
Figure 3-2. Removing the Top Cover
Rev. A