Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Service Manual page 32

Service Manual
Buttons
On
Line
Form Feed
Manual
(Form Feed + Alt)
Continue
Reset
(Continue + Ah)
Tray Select
(Menu+ Alt)
(Item+ Alt)
'r
Enter
Rev. A
Switches the printer between on-line and off-line mode. While in
When the printer is off line and the Form Feed light is lit, pressing
this button prints out data in the printer's memory.
Enters directly (short cut) to manual feed; this setting is the same as
the manual setting in the PRINTING MENU of SelecType.
Pressing this button when the Continue light is flashing clears an
error.
Enter to reset operation; LCD displays "RESET", printing stops, and
the input buffer of current interface is cleared.
If the RESET button is depressed continuously after "RESET" is
displayed, the message displayed on the LCD changes to "RESET
ALL" (about 5 seconds), and the printer enters to WARM BOOT
operation; printer clears all RAM.
Modifies the function of other buttons.
Enters SelecType mode.
Changes the menu in SelecType mode.
Enters directly (short cut) to the paper tray select setting in CONFIG
MENU of SelecType.
Enters SelecType mode.
Changes the item in SelecType mcde.
Enters directly (short cut) to the NIP TRAY SIZE setting in TRAY
MENU of SelecType.
Changes to the next available option of SelecType.
Changes to the previous available option of SelecType.
Sets available option of SelecType.
General Description
1-21