Clearing Paper Jams From The Center Output Tray - Epson WorkForce AL-M200DN User Manual

5. Close the rear cover.
If the error is not resolved, there may be a piece of paper remaining inside the printer. Use the
following procedure to clear the jam.
6. Load a print media on the Paper Tray or PSI if there is no print media.
7. Press and hold
The print media is fed to push out the jammed paper.

Clearing Paper Jams From the Center Output Tray

Important:
❏ To prevent electric shock, always turn off the printer and disconnect the power cord from the
grounded outlet before performing maintenance.
❏ To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes
extremely hot during use.
❏ Protect the OPC drum against bright light. If the rear cover is left open for more than three minutes,
print quality may deteriorate.
Note:
To resolve the error displayed on the LCD panel, you must clear all print media from the print media
path.
(Cancel Job) button for more than three seconds.
AL-M200 Series User's Guide
Troubleshooting 184