Setting Collated (Sort) Copying - Epson AcuLaser CX37DN Series User Manual

Note:
❏ Duplex (double-sided) document copying can only be performed from the ADF.
❏ If you are making a large number of copies when copying a duplex document as a simplex document,
you may not be able to copy if the memory becomes full.
1. In the main screen (Copy mode), press the u or d key to select the current simplex/duplex
(single-sided/double-sided) setting, and then press the Select key.
2. Press the u or d key to select 2-SIDE & 2-SIDE for a duplex (double-sided) copy or 2-SIDE &
1-SIDE for a simplex (single-sided) copy, and then press the Select key.
3. Press the u or d key to select LONG EDGE or SHORT EDGE as the binding position in the document
to be scanned, and then press the Select key.
4. If 2-SIDE & 2-SIDE was selected in step 2, select LONG EDGE or SHORT EDGE as the binding
position of the duplex (double-sided) copy, and then press the Select key.
5. Load the document into the ADF for the front side to be scanned.
6. To print color copies, press the Start (Color) key. To print monochrome copies, press the Start
(B&W) key.
The front side of the document is scanned.
7. Load the document into the ADF for the back side to be scanned, and then press the Select key.
The back side of the document is scanned, and then the copy is printed.

Setting Collated (Sort) Copying

With collated (Sort) copying, multiple copies of multi-page documents can be printed in order and
sorted by copy set.
Note:
If you are making a large number of copies, you may not be able to copy if the memory becomes full.
Collated (Sort) Copying From the ADF
1. In the main screen (Copy mode), press the u or d key to select the current Sort setting, and then
press the Select key.
2. Press the u or d key to select SORT, and then press the Select key.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User's Guide
Using the Copier 136