Table of Contents
Advertisement
Catalog Explorer User Manual
______________________________________________________________________________
5. Pull-down Menus
5.1 File Menu
Menu Selection
Open
Model Code
Close
Favorite Parts
Catalog Information
(File names)
Shut down 3D-PC
________________________________________________________________________________
Page 12 of 36
Visit our knowledgebase at:
Operation
Open a Parts Catalog (.rpcv) file.
Select a specific model code from the list.
This selection is made just after selecting an *.rpcv file from
"Open", in order to specify the specific destination (e.g. EU model
versus NA model). It can also be made while an *.rpcv file is
already open, in order to switch over to the catalog data for another
destination.
Close a Parts Catalog file.
Note: When you go to close the file, a confirmation dialog is
displayed alerting the user that the Favorite Parts data will be
cleared when the file is closed.
Displays the Favorite Parts list.
Note:
This list consists of parts that were added from the individual parts
list (thumbnail display).
The part name and part number for parts saved to this list can be
copied as a text string to the Windows clipboard. To do this, click on
the [Copy to clipboard] button in the Favorite Parts screen.
Display the model name, version and creation date of the catalog
data currently open.
Filenames of recently opened Parts Catalog files, if any, are
displayed in the middle of the pull-down menu. These files can be
opened simply by clicking on the filename.
Closes the Catalog Explorer.
http://www.ricoh-usa.com/support/knowledgebase.asp
Copyright 2008 Ricoh Americas Corporation
Advertisement
Table of Contents
