Display screen
Press
and the following screen appears.
If the screen is not displayed, press
Displays the command status.
Displays the current needle
position/total stitch count.
Programming flowchart
Programming
Position the sewing start position and press
Input the command for programming.
(Refer to page 163.)
Combine straight lines, curves and other figures to make patterns to the pattern sheet. After completing
each pattern, press
The data is available until deletion.
Input end code.
(Refer to page 181.)
.
.
Programmer
Chapter 3 Programming with Command Function
Displays distance from the home position.
Displays distance from the
previous needle position.
Displays the end code,
if applicable.
Displays the stitch length.
Displays the input value.
.
121