Brother BAS-311F-0 Instruction Manual page 149

Chapter 3 Programming with Command Function
Moving to position 1.
1. Press and press
The work clamp moves to the start position.
Deleting 1
1. Press .
2. Input the number of stitches to be deleted and
press .
The example is deleting 1 stitch ahead.
Press .
3. The needle point moves to 2.
Saving
1. Specify the program number on the operation
panel and press the read/write switch for writing
into the floppy disk.
Ending program
1. Press .
148
.
Programmer