Brother BAS-311F-0 Instruction Manual page 76

2. Press and press
The work clamp moves to point A.
3. Press .
4. Select with
5. Select with
6. Move the work clamp with
the needle point is at point B of the pattern.
Record the coordinates (values of X and Y). Do not
press .
7. Press three times.
The needle point returns to the home position.
8. Select with
9. Press and press
The work clamp moves to point C.
10. Press .
11. Select with
12. Select with
13. Move the work clamp with
coordinates recorded in step 6.
14. Turn the pulley with a hand and put a marking
with the needle to indicate the position of point
D.
.
and press
and press
so that
and press .
.
and press
and press
for the
Programmer
.
.
.
.
Chapter 2 Programming with Help Function
75