Resizing - Brother BAS-311F-0 Instruction Manual

Chapter 3 Programming with Command Function

Resizing

Command to be used
This function is available only when the needle is at the home position.
1. Make sure that the needle is at the home position.
Press if the needle is not at the home position.
2. Determine the reference point for resizing with
3. Input
4. Input the magnification in 3 digits in the X direction and press
Magnification values of 0 - 400 are available for input.
5. Input the magnification in 3 digits in the Y direction and press
Magnification values of 0 - 400 are available for input.
186
Resizing a pattern in the X and Y directions
Used to input magnification in the X direction.
Used to input magnification in the Y direction.
.
.
Programmer
.
.