Brother BAS-311F-0 Instruction Manual page 84

6. Select with
7. Move the work clamp with
when the needle point is at given point C.
8. Press .
Inputting the end code
1. Select with
2. Select the end code type with
press .
"111" is selected in the example. Press
work clamp returns to the first stitch (point A).
3. Press .
The work clamp returns to the home position.
Saving
1. Select with
2. Select with
3. Input the data number and press
and press .
. Press
and press
.
and the
and press .
and press .
.
Programmer
and
Chapter 2 Programming with Help Function
83