Brother BAS-311F-0 Instruction Manual page 159

Chapter 3 Programming with Command Function
2. Move the work clamp with
needle point is at B of the pattern.
Record the coordinates (values of
If the moving distance is long, press
movement.
3. Press .
The work clamp moves to the home position.
4. Press and press
The needle point moves to point C.
5. Move the work clamp with
coordinates recorded in step 2.
The moved point is now D.
If the moving distance is long, press
6. Turn the pulley with a hand and put a marking
with the needle to indicate the position of point
D.
7. Turn the pulley with a hand and move the
needle to the top point.
8. Press .
The work clamp returns to the home position.
9. Move the work clamp with
when the needle point is at D of the pattern.
Saving
1. Specify the program number on the operation
panel and press the read/write switch for writing
into the floppy disk.
Ending program
1. Press .
158
so that the
and ).
before
.
for the
before movement.
. Press
Programmer