Brother BAS-311F-0 Instruction Manual page 38

3. Move the work clamp with
when the needle point is at point A of the pattern.
The first stitch (point A) is programmed.
4. Program pattern 1.
5. Press after input of point B.
The number of pressing
programming method for pattern 1.
When is used for programming, press twice.
When each stitch is programmed, press once.
6. Select with
7. Move the work clamp with
when the needle point is at point C of the
pattern.
8. Press .
9. Program pattern 2.
10. When point D is programmed, press
The number of pressing
programming method for pattern 2.
When is used for programming, press twice.
When each stitch is programmed, press once.
Inputting the end code
1. Select with
2. Select the end code type with
.
"111" is selected in the example. Press
work clamp returns to the first stitch (point A).
3. Press .
The work clamp returns to the home position.
. Press
depends on the
and press .
. Press
.
depends on the
and press .
and press
and the
Programmer
Chapter 2 Programming with Help Function
37