Double Stitch - Brother BAS-311F-0 Instruction Manual

Chapter 3 Programming with Command Function
Ending program
1. Press .

Double stitch

When the line changes from straight to curve or curve to straight as in points B or E, be sure to
press to make a split.
More intermediate points such as points C or D will create smooth curves.
Programming
1. Press .
The work clamp moves to the home position and
the programmer screen is displayed.
2. Move the work clamp with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
3. Press
is the command for the double stitch.
Input the width of the double stitch in
mm is input in the example.
4. Input the stitch length and press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
5. Create the program to point F in the similar
manner of curve program.
If a straight line is present as in the example, press
at the end of the line.
132
A double stitch is programmed to make two lines with a
constant width.
The example in the left is used for explanation of a double
stitch to the left of sewing direction.
. Press
and press .
.
. 3.0
Programmer