Symmetrical Pattern - Brother BAS-311F-0 Instruction Manual

Chapter 3 Programming with Command Function
Inputting the end code
1. Press at the last stitch and press
.
The work clamp returns to the start position.
Saving
1. Specify the program number on the operation
panel and press the read/write switch for writing
into the floppy disk.
Ending program
1. Press .

Symmetrical pattern

The following symmetrical pattern types are available:
Symmetric to Y axis
Use command
Symmetric to point
Use command
136
A pattern symmetric to the X axis or the Y axis is
programmed. After programming the pattern, select the
symmetrical pattern type to complete the pattern.
The example in the left is used for explanation of
programming symmetric to the Y axis.
.
.
Programmer
Symmetric to X axis
Use command
Turnover
Use command
.
.