Brother BAS-311F-0 Instruction Manual page 52

10. Program the following points up to point 34 in
the same manner.
When programming, be sure that the points and
splits specified on the inside line are paired with
those on the outside line respectively.
If there are any points or splits not paired, the
needle point automatically returns to the previous
point. Correct the program.
11. Press .
12. Press .
Inputting the end code
1. Select with
2. Select the end code type with
.
"111" is selected in the example. Press
work clamp returns to the first stitch (point A).
3. Press .
The work clamp returns to the home position.
Saving
1. Select with
2. Select with
3. Input the data number and press
4. Press .
Ending program
1. Press .
and press .
and press
and the
and press .
and press .
.
Programmer
Chapter 2 Programming with Help Function
51