Brother BAS-311F-0 Instruction Manual page 43

Chapter 2 Programming with Help Function
5. When point B is programmed, press
The number of pressing
programming method.
Selecting the symmetrical pattern type
1. Select with
2. Select the symmetrical pattern type and
press .
(symmetric to Y axis) is selected in the
example.
3. Input the number of feed boundaries to be
ignored and press
Refer to "Editing the current data" (page 100) for
details.
4. The needle point moves slowly from point B to
point A in the right half and it is automatically
programmed. Press
5. Press twice.
Inputting the end code
1. Select with
2. Select the end code type with
.
"111" is selected in the example. Press
work clamp returns to the first stitch (point A).
3. Press .
The work clamp returns to the home position.
42
.
depends on the
and press .
.
to make fast movement.
and press .
and press
and the
Programmer