Changing To Ethertalk; Mac Os X 10.4.X Or Earlier - Ricoh Aficio SP C232DN Operating Instructions Manual

Changing to EtherTalk

Use the following procedure to configure a Mac OS X to use EtherTalk.
Important
❒ You need an administrator name and a password (phrase). For details, con-
sult your network administrator.

Mac OS X 10.4.x or earlier

A
Open [System Preference], and then click the Network icon.
B
Click [Built-in Ethernet] in the [Show:] list box.
C
Click the [AppleTalk] tab.
D
Select the [Make AppleTalk Active] check box.
E
To change AppleTalk zones, select a name from the [AppleTalk Zone:] pop-up menu.
F
When the settings are made, click [Apply Now].
G
Quit [System Preference].
Reference
For information about installing applications required for EtherTalk, see
the Mac OS X manuals.
Mac OS X 10.5
A
On the desktop, double-click the hard drive icon.
B
Double-click [Applications], and then open the [System Preferences] folder.
C
In the [Internet & Network] category, double-click the Network icon.
D
Click [Built-in Ethernet], and then click [Advanced].
E
Click the [Apple Talk] tab.
F
Select the [Make Apple Talk Active] check box.
G
To change Apple Talk zones, select a name from the [Apple Talk Zone:] drop-
down menu.
H
When you have specified the settings you require, click [OK].
I
Click [Apply].
J
Close the [Network] window.
Changing to EtherTalk
103
9