Ethernet Configuration
If connecting the printer to a network using an Ethernet cable, set the necessary
settings, depending on the network environment, on the control panel.
Web Image Monitor or Smart Organizing Monitor can be used for the settings
related to the IP address.
Important
❒ The following are settings that can be set at the [Host Interface] menu and their
default values.
Setting Name
DHCP
MAC Address
IP Address
Subnet Mask
Gateway Address
Frame Type (NW)
Active Protocol
Ethernet Speed
Note
❒ If [DHCP] is in use, the IP address, subnet mask, and gateway address are all
set automatically.
❒ Each printer has a unique [MAC Address] value.
❒ Set the Ethernet speed if necessary.
4. Configuration
On
XX-XX-XX-XX-XX-XX
192.0.0.192
255.255.255.0
192.0.0.192
Auto Select
• TCP/IP
Active
• NetWare
Active
• AppleTalk
Active
Auto Select
Value
27