Installing Screen Fonts; Changing To Ethertalk - Ricoh Aficio MP W3600 Supplement Manual

Mac OS Configuration

Installing Screen fonts

Follow the procedure below to install screen fonts.
The screen fonts described below can be found in the [Fonts] folder on the CD-ROM.
A
Start a Mac OS.
B
Insert the CD-ROM into the CD-ROM drive.
2
The CD-ROM drive icon appears.
C
Double-click the CD-ROM drive icon.
The contents of the CD-ROM appear.
D
Double-click the [Mac OS 8 and 9] folder.
E
Double-click the [Fonts] folder.
F
Double-click the [Screen font] folder.
G
Double-click the [TrueType] or [Type1] folder.
Select the font type you want to use.
H
Copy the fonts you want to install in [System Folder].
A confirmation message appears.
I
Click [OK].
The fonts are installed.
J
Restart the Mac OS.

Changing to EtherTalk

Follow the procedure below to configure to a Mac OS to use EtherTalk.
A
Open [Control Panel], and then double-click the AppleTalk icon.
B
On the [Connect via:] pop-up menu, click [Ethernet].
C
If you change zones, select a name on the [Current zone:] pop-up menu.
D
Close the AppleTalk control panel.
E
Restart the computer.
Note
❒ The procedures used to configure Mac OS may vary depending on the Mac
OS version. The following describes how to configure Mac OS 9.1. If you
are using a different version of Mac OS, use the following procedures as a
reference and see the manuals for your Mac OS version.
❒ Confirm the Connection to the Printer with TCP/IP
Reference
For information about installing applications required for EtherTalk, see
the Mac OS manuals.
44