Ricoh Aficio SP C232DN Operating Instructions Manual page 235

• Horizontal
Specify the horizontal width between 90 and 216 mm (3.54 and 8.50 inches).
• Vertical
Specify the vertical length between 148 and 900 mm (5.83 and 35.43 inches).
• Paper Type
Specify the paper type for the bypass tray.
Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper,
Letterhead, Preprinted Paper, Prepunched Paper, Labels, Bond Paper,
Cardstock, Thick Paper 1, Thick Paper 2, Envelope, Any Type
❖ Paper Tray Priority
The tray selected here is used when no tray is specified for a print job.
Note
❒ Tray 2 is available only when the optional paper feed unit is attached to the
printer.
❒ Only the PCL6 and PostScript 3 printer driver supports custom size paper
longer than 356 mm (14.02 inches). The additional memory unit is required
when using the PCL6 printer driver. The additional memory unit might also
be required when using the PostScript 3 printer driver, depending on the
print data.
Printing the printer configurations
On the [Paper] page, you can print lists of printer information.
Important
❒ To use this function, the printer must be monitored from Web Image Monitor.
In the [List/Test Print] list, select the item you want to print. You can print the fol-
lowing:
❖ Configuration Page
Prints the current configurations and general information of the printer.
❖ Menu List
Prints the menu list showing all available menus
❖ Test Page
Prints a test page for checking the printing condition. The test page contains
network settings and counter information.
❖ PCL Configuration/Font Page
Prints the current configuration and installed PCL font list.
❖ PS Configuration/Font Page
Prints the current configuration and installed PostScript font list.
Using Web Image Monitor
6
71