Paper Size - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

Chapter 3: Installing the Software
feature to print on letterhead stationery for the
first page and plain paper for the rest of a
document.
Choose Use same paper source for all pages if
you do not want to use a different paper source
for the first page than for subsequent pages. Then
choose the desired paper source in the area below
the Paper Source Selection box.
Choose Different paper source for first page (e.g.
letterhead) if you want to use a different paper
source for the first page of your document. You
can then specify the two paper sources by clicking
on the First Page Source and Other Pages vertical
tabs.

Paper Size

Select from such supported paper sizes as Letter,
Legal, A4, Executive, B5, Booklet on Letter,
Booklet on Legal, Booklet on A4, Com10
Envelope, Monarch Envelope, DL Envelope, C5
Envelope, Index Card, etc.
The list of paper sizes displayed depends on the
Paper Source you choose. For instance, if the
Multi-purpose tray is selected, envelope sizes will
be displayed in the list.
(You can choose to include U.S. or international
paper sizes, or both, in the list of paper sizes. Use
the Paper Sizes setting in the Advanced tab.)
50
Selecting a paper size from the list that starts with
"Booklet" (such as "Booklet on Letter") activates
the SuperScript 870 Windows Printer Driver's
Booklet printing feature. For information on this
feature, see Booklet Printing in the Setup Tab
section, above.
Note: The paper size setting in a
Windows program may override the paper
size setting in the SuperScript 870
Windows Printer Driver.
Paper Type (Advanced Option)
Your SuperScript 870 has been designed to print
reliably on a wide variety of media types without
any special configuration required by the user.
This is denoted by the default "automatic" setting.
However, there may be occasions that require a
finer degree of control in order to achieve the best
possible printing results given the operating
environment and print media characteristics.
For example, a high level of humidity in the
environment or a certain percentage or type of
fiber content in a heavy paper stock may cause the
toner to adhere improperly to the paper. If this
occurs, one of the specific Paper Type settings
may provide better results given your specific
paper and environmental conditions. Use of the
Paper Type option ensures that optimal settings
for internal printer characteristics like fuser