NEC 870 - SuperScript B/W Laser Printer Online User's Manual page 29

Table 2-1: Condition Indications and Solutions
LEDs
CONDITION
Error (red) blinks Preprinting paper
Paper (amber) size error
blinks
Error (red) blinks Postprinting paper
On Line (green)
size error
steady
Error (red) blinks
Adobe Memory
On Line (green)
Booster used
steady
Manual feed
Waiting for
(amber) blinks
manual feed
Chapter 2: Operator Panel
CAUSE/SOLUTION
The printer has detected that the paper size being requested is not
available in the specified source (not all paper sources support
paper size detection).
Corrective Action: Put the correct size paper in the specified
source. Printing will continue automatically.
The printer has detected that the paper size used in printing was
not the size specified in the document. The Windows Status
Monitor will reflect this condition.
Corrective Action: Reprint the document making sure the
correct size paper is loaded.
This light informs the user that Adobe Memory Booster was used
for the page currently being printed. See page 55 for more infor-
mation.
This condition occurs when the printer is waiting for paper to be
fed from the Manual feed tray.
Corrective Action: Insert a piece of paper into the Manual feed
tray. Then momentarily press the Operator panel button.
• If the button is pressed without supplying paper, the printer will
pull paper from the Multi-purpose tray. This includes sending
another "Waiting for Manual Feed" status message and blinking
the amber light.
• If the button is not pressed within the manual feed timeout
period, the job aborts and the "Manual Feed Timeout" message is
returned.
29