Installation For Dos Software Only; Installation For Windows 95 And Windows 98 - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

Installation for DOS Software Only

If you want to install the SuperScript 870 DOS
software without using the Windows Install
program, see "Installing SuperScript 870 DOS
software only," in Chapter 5.
Note: If you are encountering difficulty
installing the software or printing a
Settings page, refer to chapter 9,
"Troubleshooting", in this user's guide.

Installation for Windows 95 and Windows 98

The SuperScript 870 supports multiple installation
paths in Windows 95/98:
• The printer may be installed by selecting Start
> Run from the task bar.
• The printer may be detected with Plug & Play
if it is locally connected,
• The printer may be installed with "Add
Printer Wizard" in the Printers folder under
My Computer.
The recommended way to install the software is
by selecting Start > Run from the taskbar.
Chapter 3: Installing the Software
From the Run dialog box type D:\Setup.exe
(where "D" is your CD ROM drive) and click OK.
Click on the "Add Printer" button and continue
following the directions on the screen.
35