NEC 870 - SuperScript B/W Laser Printer Online User's Manual page 58

Chapter 3: Installing the Software
Wait timeout–This setting defines the time that
the printer waits between blocks of data coming
from the computer before it considers the job
complete and processes what is in the print buffer.
The Wait timeout can be any time between 1 and
255 seconds. The Wait timeout default is 200
seconds (40 seconds for DOS jobs). For most text
applications this is adequate. If you plan on
generating very complex pages, you may want to
increase the Wait timeout.
Manual Feed/Duplex timeout–This setting is
used to determine the length of time the printer
will wait for paper to be manually fed before
pulling paper from the tray or cassette. It may be
set to OFF to tell the printer to wait indefinitely.
The default setting is 255 seconds and should be
left on if the printer is connected to a network.
Energy Saving
Checking Enable Energy Saving allows your
printer to reduce power consumption to a
minimum during inactive periods. It will set your
printer to power down after a specified time of
inactivity. This will save energy when you are not
using your printer. To "wake" the printer up,
press the Operator panel button, press "resume"
in the maximized status monitor, or send a print
job to the printer.
58
You can adjust the setting for the number of
minutes before the printer powers down by
entering any number between 1 and 255 in the
minutes field. The default setting is 30 minutes.