NEC 870 - SuperScript B/W Laser Printer Online User's Manual page 43

To select a bitmap to be used as a graphic
watermark, enter the path or select browse to
locate the bitmap file.
You can name your graphic separate from the file
name in the Bitmap field. Use no more than 16
characters (in the Name field).
The preview will display both the currently
selected text and any selected bitmap. However,
you can change the bitmap only in this dialog box.
You may then change the darkness, scale, and
position of your graphic watermark.
Press the OK button when done.
If you try to print using a bitmap watermark and
Chapter 3: Installing the Software
the driver cannot locate the bitmap file at print
time (it may have been moved, renamed, or
deleted), the screen displays an alert. You can then
choose to either print without the graphic or
cancel the print job.
Choosing Actual Size will place the graphic on the
page at 100%. If the graphic is large, this can result
in the image running off the edge of the paper,
which will be reflected in the preview and can be
corrected by resizing at a lower percentage.
Note: The angle option available in the
text watermark dialog box is not available
for graphics.
43