Change Printer Port Menu; Dos Status Monitor (Tsr) - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

Audible Warnings
Choose whether or not you want sound warnings
when there is a printer error. The default for
audible warnings is on.
Hot-key
Choose the hot-key used to pop up the DOS
Status Monitor. The default hot-key combination
is b-a-S. If you want to specify a different
hot-key, you can press any combination of the Alt
key, Ctrl key, shift key, and any letter or number.
Save Settings, Return to Main Menu
Select this option when you have selected the
settings on this menu set as you want them. The
current settings will be saved and you will return
to the Main Menu.
If you do not want to keep your changes, press ^
to return to the Main Menu without saving your
settings. Press pto restore the default settings.

Change Printer Port Menu

This menu lets you specify which parallel port
your SuperScript 870 printer is connected to. The
port you select is also the port that the DOS Status
Monitor program will monitor. The default printer
port is LPT1.
Chapter 5: DOS Printing

DOS Status Monitor (TSR)

The DOS Status Monitor is a memory-resident
(TSR) program that can pop-up over DOS
programs to give you feedback about your
printer's status, as well as enabling you to pause/
continue printing, reset the printer, or eject a page.
79