Destination Tab; Output Settings - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

Chapter 3: Installing the Software
temperature and toner voltage levels will be used
for the print job. The four special settings
available are plain paper, transparency, envelope,
and heavy paper.
To enable this option, use the drop down list box
under Paper type to select the specific type of
media that you are using. Again, under most
circumstances the default setting of "Automatic"
is adequate, and no specific user action is
required.

Destination Tab

The Destination Tab allows you to choose the
output of your print job.

Output Settings

If the Output Settings is set to Printer, the print job
is sent to your printer. If you want to send the
print job to a file for printing later, click Print to
file. You will be prompted for a file name when
you print. Note that the file you create when you
print to file can only be printed on a SuperScript
870 printer. To copy this file to the printer, use the
DOS copy command. For example:
Copy /b filename.prn lpt1
51