Operator Panel Button - NEC 870 - SuperScript B/W Laser Printer Online User's Manual

Operator Panel Button

Printer functions associated with the Operator
panel button are not executed until you release the
button. The LEDs show that certain conditions
have been selected.
Table 2-2: Operator Panel Button Use
CONDITION
Power On
Any condition except Power On
Any condition except Power On
Ready
Receiving/processing/
printing data
Paused/off line
Energy saving
No paper, cover open, paper jam
Paper size error
The following table shows the effect of pressing
the button for certain conditions and durations.
Pressing the button for other conditions has no
effect.
DURATION
At power up until Start factory reset processing
all LEDs blink
4 seconds Resets the printer: All data in the printer is lost
10 seconds Begins printing a Settings page
Momentary Takes printer off line
Momentary Pauses printing
Momentary Resumes printing from pause; or to on line from
off line
Momentary Takes printer out of Energy Saving Mode
Momentary Loads the paper or resets the error condition after
corrective action
Momentary Resumes printing
Chapter 2: Operator Panel
EFFECT
31