NEC 870 - SuperScript B/W Laser Printer Online User's Manual page 136

Appendix B: Safety Information
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment to an outlet on a
circuit different from the one to which the
receiver is connected.
• Consult the dealer or an experienced radio or
TV technician for help.
Use a shielded and properly grounded I/O cable
to ensure compliance of this unit to the specified
limits of the rules.
If your printer is the NEC SuperScript 870N
model or if you have installed the optional
Network Interface Card (NIC), the printer meets
the requirements of FCC Class A when connected
to an Ethernet cable.
(For Canadian Use Only)
This digital apparatus does not exceed the Class B
limits for radio noise emissions from digital
apparatus as set out in the radio interference
regulations of the Canadian Department of
Communications.
Le présent appareil numerique n'émet pas de
bruits radioélectriques dépassant les limites
136
applicables aux appareils numériques de Classe B
presentes dans le règlement sur le brouillage
radioélectrique édicaté par le Ministère des
Communications du Canada.
Declaration of Conformity
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
U.S. Responsible Party: NEC Technologies Inc.
Address: 1250 N. Arlington Heights Road,
Itasca, Illinois 60143
Telephone Number: 630-467-5000
Type of product: Laser Printer
Equipment Classification: Class B Peripheral
Model: SuperScript 870
We hereby declare that the equipment
specified above conforms to the technical
standards as specified in the FCC Rules.