NEC 870 - SuperScript B/W Laser Printer Online User's Manual page 76

Chapter 5: DOS Printing
Energy Saving Timeout
This setting lets you specify how long your
printer will wait without receiving data before
going into Energy Saving Mode. The default
setting is 30 minutes. The On Line light on your
printer's Operator panel will blink slowly when
the printer is in Energy Saving Mode. The printer
will automatically "wake" from Energy Saving
Mode when it receives a print job or the Operator
panel button is pressed.
Adobe Memory Booster
This option lets you turn Adobe Memory Booster
on or off. Adobe Memory Booster is an advanced
printer technology that effectively triples your
printer's memory, allowing you to print complex
documents that traditional printer architectures
would fail to print. The default setting is on and
NEC recommends that you leave this on. See
Chapter 3 of this user's guide for more
information.
JamRecovery
When jam recovery is turned on, the printer
reserves part of its memory so that it can reprint a
page if there is a printer jam. This causes printing
to be slower. The default setting is off.
Wait Timeout
This setting determines how long the printer will
76
wait for data before ejecting a partially printed
page. You may want to set a longer time if you use
software that pauses for processing for extended
periods during printing (such as some database
programs). The default setting is 40 seconds. You
can deactivate the wait timeout by setting it to off.
Manual Feed Timeout
This setting determines how long the printer will
wait for you to insert paper into the manual feed
tray. If you do not insert paper within the
specified period, the printer will print the job
using paper from the Multi-purpose tray. The
default setting is 255 seconds. You can also set this
timeout to off, which causes the printer to wait
indefinitely (not recommended for a network
printer).
Auto-continue
When auto-continue is on, the printer
automatically resumes printing after most errors.
When auto-continue is off, the printer waits for
you to press the Operator panel button before it
resumes printing. The default setting is on.
Horizontal Offset
The horizontal offset setting allows you to shift
the printing on the page either to the right or left.
You can use this setting to very accurately adjust
the printing position, for example, if you need to