Loading Paper - NEC SuperScript 100C User Manual

Loading Paper in the Printer
Pull out the extendible top guide (1) on the ASF and rotate it up to its
vertical position (2), to support the paper loaded.
Insert picture
Holding the tab on the right edge of the movable guide on the ASF, pull the
guide slightly forwards and move it to its extreme right position (physical
right hand margin).
Insert picture
Fan the paper thoroughly.
Align the paper against the fixed left hand guide and load it into the tray,
pushing it down carefully until it stops against the feed rollers inside the
printer.
Do NOT add paper to the ASF; always remove any existing paper and fan it together
with the paper to be loaded.
Position the right guide against the right edge of the paper.
With the printer powered, press Form Feed. The paper moves to the Top of Form
(TOF) position. Press Form Feed again, to make sure that the paper feeds
smoothly through and exits from the printer, without crushing or skewing.
See Chapter 3 in the User Guide for further information on the types of paper you
can use and the page layout.