Ch. 4 The Operator Panel; Overview; Operator Panel Buttons - NEC SuperScript 1400 User Manual

CHAPTER 4
THE OPERATOR PANEL
O
VERVIEW
This chapter describes how to interpret and use the
SuperScript 1400's Operator Panel. Most printer tasks can be
accomplished through the printer driver software but in
some cases it is more convenient to use the Operator Panel.
For example, you can cancel a print job by simply pressing
the Cancel button.
Signals from the Operator Panel lights, or LEDs, clearly
display printer status.
Manual Feed
Go/Continue
Error
Paper
Ready
Cancel
Button
Button
O P
PERATOR ANEL
The printer has two buttons, Go/Continue and Cancel. Use
these buttons to cancel a print job, reset the printer, print a
Configuration Sheet, or clean internal printer parts.
The table on this page shows single button functionality.
The table on the next page shows double button
functionality.
Button
Cancel
• When the printer is processing a print job,
you can press this button to cancel the print
job. Pressing the Cancel button for 1
second will cause the printer to flush out all
received data. The time it takes to cancel a
job depends on the size of the print job.
• When there is no print job in the printer,
pressing the Cancel button has no effect.
Go/Continue
• Press the Go/Continue button to resume
printing as in a manual print job.
• Use this button to print a Configuration
Sheet. From the ready state, press and
hold down the Go/Continue button You
must press and hold the button
(approximately 4 seconds) until all four
LEDs blink two times, and then cycle.
B
UTTONS
Function
25