C2T Connectors; C2T Breakout Cable Connectors - IBM 8676 - Eserver xSeries 335 Hardware Maintenance Manual And Troubleshooting Manual

The following sections describe these connectors.
If you have an optional Remote Supervisor Adapter (system-management adapter)
installed in PCI-X slot 1, the adapter has an Ethernet connector, a serial connector,
and an Advanced System Management (ASM) Interconnect connector. See the
documentation that comes with the Remote Supervisor Adapter for more information
about the ASM Interconnect network.

C2T connectors

Use the C2T (IN) and C2T (OUT) connectors to connect the server to other servers
in an ASM interconnect network or C2T chain. See "Cabling the server" on page 59
for information about ASM interconnect networks and C2T chaining.

C2T breakout cable connectors

These connectors are on the C2T breakout cable, which you use to connect a
monitor, keyboard, and pointing device to a server in a C2T chain. See "Cabling the
server" on page 59 for information about C2T chaining.
Auxiliary-device (pointing-device) connector: Use this connector to connect a
mouse or other pointing device. This connector has a mouse icon to help you
identify it. The following illustration shows an auxiliary-device connector.
6
4
Keyboard connector: Use this connector to connect a PS/2 (non-USB) keyboard
to the server. The connector has a keyboard icon to help you identify it. The
following illustration shows a keyboard connector.
6
4
If you attach a keyboard to this connector, USB ports and devices are disabled
during POST.
Video connector: Use this connector to connect a monitor to the server. The
connector is dark blue to help you identify it. The following illustration shows a video
connector.
66
xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide
5
3
2 1
5
3
1
2
5 1
15 11