Using Custom configuration: To configure the controller manually, select Custom
configuration. Using Custom configuration, you can select which two physical drives
you want to configure and create a hot-spare drive.
Complete the following steps to use Custom configuration:
1. In the ServeRAID Manager tree, click the controller.
2. Click Custom configuration.
3. Click Next. The "Create arrays" window opens.
Figure 3. "Create arrays" window
4. From the list of ready drives, select the two drives you want to move to the
array.
5. Click (Add selected drives) to add the drives to the array.
6. Complete the following steps if you want to configure a hot-spare drive:
a. Click the Spares tab.
b. Select the physical drive you want to designate as the hot-spare drive;
then, click
(Add selected drives).
Chapter 2. Configuring the server
13