IBM 8676 - Eserver xSeries 335 Hardware Maintenance Manual And Troubleshooting Manual page 44

Table 5. NDIS (Windows NT) driver messages for the Ethernet controller (continued)
Error code (hex) Description
0x0F Explanation: Could not allocate enough memory for other structures.
For Windows NT:
Action:
1. From the Windows NT desktop, click Start Æ Control Panel Æ Networks Æ Adapters.
2. Select an IBM Ethernet adapter from the list.
3. Click Properties Æ Advanced.
4. Lower the resource values that apply to the transmit queue.
For Windows 2000:
Action:
1. From the Windows 2000 desktop, click Start Æ Settings Æ Control Panel Æ Network and
Dial-up Connections.
2. Right-click an IBM Ethernet adapter in the list and click Properties.
3. Select a component and click Configure.
4. Click the Advanced tab and lower the resource values that apply to the transmit queue.
0x10 Explanation: Did not find any Ethernet controllers.
Action: Using the Configuration/Setup Utility program, make sure that Ethernet is enabled.
0x11 Explanation: Multiple Ethernet controllers found, but none matched the required ID.
Action: Using the Configuration/Setup Utility program, make sure that Ethernet is enabled.
0x13 Explanation: Did not find any Ethernet controllers that matched the required subven/subdev.
Action: Using the Configuration/Setup Utility program, make sure that Ethernet is enabled.
0x16 Explanation: Single adapter found, but multiple instances tried to load.
Action: Using the Configuration/Setup Utility program, make sure that Ethernet is enabled, and
that the integrated 10/100 Ethernet controller or the optional Ethernet PCI adapter are enabled.
0x17 Explanation: Slot parameter not specified in the registry.
Action: Remove the adapter driver and reinstall it.
All other Action: See supplementary documentation, such as www.ibm.com/pc/support, for more
4-character information.
hexadecimal
codes
Ethernet Windows NDIS teaming messages
This section explains the the messages associated with Ethernet teaming.
Table 6. NDIS Windows driver teaming messages for the Ethernet controller
Event ID Type
01 Error
02 Error
34
xSeries 335 Type 8676, Type 8830: Hardware Maintenance Manual and Troubleshooting Guide
Description
Explanation: Team name and physical adapter name are the same. This
is an invalid configuration.
Action: Reconfigure the adapter team by double-clicking the PROSet
icon in the Control Panel.
Explanation: Unable to allocate required resources.
Action: Free some memory resources and restart.