Configuring The Server - Lenovo System x3100 M4 Installation And Service Manual

• ServeRAID firmware is stored in ROM on the system board and the RAID adapter (if one is installed).
• SAS/SATA firmware is stored in ROM on the SAS/SATA controller on the system board.

Configuring the server

The following configuration programs come with the server:
• Setup utility
The Setup utility is part of the UEFI firmware. Use it to perform configuration tasks such as changing
interrupt request (IRQ) settings, changing the startup-device sequence, setting the date and time, and
setting passwords. For information about using this program, see
• Boot Manager program
The Boot Manager is part of the UEFI firmware. Use it to override the startup sequence that is set in the
Setup utility and temporarily assign a device to be first in the startup sequence. For more information
about using this program, see
• IBM ServerGuide Setup and Installation CD
The ServerGuide program provides software-setup tools and installation tools that are designed for the
server. Use this CD during the installation of the server to configure basic hardware features, such as an
integrated SAS/SATA controller with RAID capabilities, and to simplify the installation of your operating
system. For information about using this CD, see
page 79.
• Integrated management module
Use the integrated management module II (IMM2) for configuration, to update the firmware and sensor
data record/field replaceable unit (SDR/FRU) data, and to remotely manage a network. For information
about using the IMM, see
Management Module II User's Guide at
5086346 .
• Remote presence capability and blue-screen capture
The remote presence and blue-screen capture features are integrated functions of the integrated
management module (IMM2). The remote presence feature provides the following functions:
– Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system
state
– Remotely accessing the server, using the keyboard and mouse from a remote client
– Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO
and diskette image files as virtual drives that are available for use by the server
– Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive
The blue-screen capture feature captures the video display contents before the IMM restarts the server
when the IMM detects an operating-system hang condition. A system administrator can use the blue-
screen capture feature to assist in determining the cause of the hang condition. For more information, see
"Using the remote presence and blue-screen capture features" on page
• Ethernet controller configuration
For information about configuring the Ethernet controller, see
page 91.
• IBM Advanced Settings Utility (ASU) program
Use this program as an alternative to the Setup utility for modifying UEFI settings and IMM settings. Use
the ASU program online or out of band to modify UEFI settings from the command line without the need to
System x3100 M4 Installation and Service Guide
78
"Using the Boot Manager" on page
"Using the ServerGuide Setup and Installation CD" on
"Using the integrated management module" on page 88
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=migr-
"Using the Setup utility" on page
87.
and the Integrated
89.
"Configuring the Ethernet controller" on
80.