What To Do Next - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Chapter 7 Configuring the Adaptive Security Appliance
Note

What to Do Next

To Do This...
Configure the adaptive security appliance to
protect a DMZ web server
Configure the adaptive security appliance for
remote-access VPN
Configure the adaptive security appliance for SSL
VPN connections using software clients
Configure the adaptive security appliance for SSL
VPN connections using a web browser
Configure the adaptive security appliance for
site-to-site VPN
78-19186-01
If you get an error requesting a DES license or a 3DES-AES license, see
Note
Appendix A, "Obtaining a 3DES/AES License"
Based on your network security policy, you should also consider configuring the
adaptive security appliance to deny all ICMP traffic through the outside interface
or any other interface that is necessary. You can configure this access control
policy using ASDM. From the ASDM main page, click Configuration >
Properties > ICMP Rules. Add an entry for the outside interface. Set the IP
address to 0.0.0.0, the netmask to 0.0.0.0, and Action to deny.
Configure the adaptive security appliance for your deployment using one or more
of the following chapters.
See...
Chapter 8, "Scenario: DMZ Configuration"
Chapter 9, "Scenario: IPsec Remote-Access VPN
Configuration"
Chapter 10, "Scenario: Configuring Connections for
a Cisco AnyConnect VPN Client"
Chapter 11, "Scenario: SSL VPN Clientless
Connections"
Chapter 12, "Scenario: Site-to-Site VPN
Configuration"
Cisco ASA 5500 Series Getting Started Guide
What to Do Next
for information.
7-9