Chapter 3
Installing the ASA 5550
c.
d.
Figure 3-10
1 RJ-45 Console port
Connect to the Auxiliary port (labeled AUX).
Step 4
a.
b.
c.
78-19186-01
Connect the RJ-45 connector to the Console port of the adaptive security
appliance as shown in
Connect the DB-9 connector to the console port on your computer.
Connecting the Console Cable
FLASH
Locate the serial console cable, which has an RJ-45 connector on one end and
a DB-9 connector on the other end for the serial port on your computer.
Connect the RJ-45 connector of the cable to the Auxiliary port (labeled AUX)
on the adaptive security appliance, as shown in
Connect the other end of the cable, the DB-9 connector, to the serial port on
your computer.
Figure
3-10.
1
2
2
RJ-45 to DB-9 console cable
Cisco ASA 5500 Series Getting Started Guide
Connecting Interface Cables
Figure
3-11.
3-15