Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual page 69

Chapter 6 Connecting Interface Cables on the ASA 5500, ASA 5510, ASA 5520, and ASA 5540 Platforms
To connect to a 4GE SSM, perform the following steps:
Connect to copper Ethernet ports to be used for network connections.
Step 1
a.
b.
78-19186-01
Connect one end of an Ethernet cable to a copper Ethernet port.
Connect the other end of the Ethernet cable to a network device, such as a
router, switch or hub.
Cisco ASA 5500 Series Getting Started Guide
Connecting to a 4GE SSM
6-7