Implementing the Cisco SSL VPN Scenario
Specifying the SSL VPN Interface
Step 1
Step 2
Step 3
Step 4
Cisco ASA 5500 Series Getting Started Guide
10-6
Chapter 10
In Step 2 of the SSL VPN Wizard, perform the following steps:
Specify a Connection Name to which remote users connect.
From the SSL VPN Interface drop-down list, choose the interface to which remote
users connect. When users establish a connection to this interface, the SSL VPN
portal page is displayed.
From the Certificate drop-down list, choose the certificate the adaptive security
appliance sends to the remote user to authenticate the adaptive security appliance.
Click Next to continue.
Scenario: Configuring Connections for a Cisco AnyConnect VPN Client
78-19186-01