Power Off The Firewall Using Fdm; What's Next - Cisco Firepower 2100 Getting Started Manual

Firepower Threat Defense Deployment with FDM
> exit
firepower#

Power Off the Firewall Using FDM

You can shut down your system properly using FDM.
Procedure
Step 1 Use FDM to shut down the firewall.
Note
a) Click Device, then click the System Settings > Reboot/Shutdown link.
b) Click Shut Down.
Step 2 Observe the Power LED and Status LED to verify that the chassis is powered off (appear unlit).
Step 3
After the chassis has successfully powered off, you can then unplug the power to physically remove power
from the chassis if necessary.

What's Next?

To continue configuring your FTD, see the documents available for your software version at
Cisco Firepower
For information related to using FDM, see
Device
For 6.4 and earlier, enter the shutdown command at the FDM CLI.
Documentation.
Manager.
Cisco Firepower Threat Defense Configuration Guide for Firepower
Cisco Firepower 2100 Getting Started Guide
Power Off the Firewall Using FDM
Navigating the
27