Scenario: Site-To-Site Vpn Configuration; Example Site-To-Site Vpn Network Topology - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Example Site-to-Site VPN Network Topology

78-19186-01
Scenario: Site-to-Site VPN
Configuration
This chapter describes how to use the adaptive security appliance to create a
site-to-site VPN.
Site-to-site VPN features provided by the adaptive security appliance enable
businesses to extend their networks across low-cost public Internet connections to
business partners and remote offices worldwide while maintaining their network
security. A VPN connection enables you to send data from one location to another
over a secure connection, or tunnel, first by authenticating both ends of the
connection, and then by automatically encrypting all data sent between the two
sites.
This chapter includes the following sections:
Example Site-to-Site VPN Network Topology, page 12-1
•
Implementing the Site-to-Site Scenario, page 12-2
•
Configuring the Other Side of the VPN Connection, page 12-12
•
What to Do Next, page 12-13
•
Figure 12-1 shows an example VPN tunnel between two adaptive security
appliances.
C H A P T E R
Cisco ASA 5500 Series Getting Started Guide
12
12-1