Implementing The Ipsec Remote-Access Vpn Scenario - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Implementing the IPsec Remote-Access VPN Scenario

Implementing the IPsec Remote-Access VPN
Scenario
Cisco ASA 5500 Series Getting Started Guide
9-2
Figure 9-1 Network Layout for Remote Access VPN Scenario
DNS Server
10.10.10.163
Internal
Inside
network
10.10.10.0
WINS Server
10.10.10.133
This section describes how to configure the adaptive security appliance to accept
IPsec VPN connections from remote clients and devices. If you are implementing
an Easy VPN solution, this section describes how to configure an Easy VPN
server (also known as a headend device).
Values for example configuration settings are taken from the remote-access
scenario illustrated in
This section includes the following topics:
Information to Have Available, page 9-3
•
Configuring an IPsec Remote-Access VPN, page 9-3
•
Selecting VPN Client Types, page 9-5
•
Specifying the VPN Tunnel Group Name and Authentication Method,
•
page 9-6
Specifying a User Authentication Method, page 9-7
•
Chapter 9 Scenario: IPsec Remote-Access VPN Configuration
Security
Appliance
Outside
Figure 9-1.
AnyConnect
Client
Internet
AnyConnect
Client
Browser-based
client
78-19186-01