Configuring Client Attributes - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Chapter 9 Scenario: IPsec Remote-Access VPN Configuration
Step 2
Step 3

Configuring Client Attributes

Step 1
78-19186-01
In the Add IP Pool dialog box, do the following:
Enter the Starting IP address and Ending IP address of the range.
a.
(Optional) Enter a subnet mask or choose a subnet mask for the range of IP
b.
addresses from the Subnet Mask drop-down list.
Click OK to return to Step 6 of the VPN Wizard.
c.
Click Next to continue.
To access your network, each remote access client needs basic network
configuration information, such as which DNS and WINS servers to use and the
default domain name. Instead of configuring each remote client individually, you
can provide the client information to ASDM. The adaptive security appliance
pushes this information to the remote client or Easy VPN hardware client when a
connection is established.
Make sure that you specify the correct values, or remote clients will not be able
to use DNS names for resolution or use Windows networking.
In Step 7 of the VPN Wizard, perform the following steps:
Enter the network configuration information to be pushed to remote clients.
Implementing the IPsec Remote-Access VPN Scenario
Cisco ASA 5500 Series Getting Started Guide
9-11