What To Do Next - Cisco 5510 - ASA SSL / IPsec VPN Edition Getting Started Manual

Chapter 9 Scenario: IPsec Remote-Access VPN Configuration

What to Do Next

78-19186-01
To establish end-to-end, encrypted VPN tunnels for secure connectivity for
mobile employees or teleworkers, obtain the Cisco VPN client software.
For more information about the Cisco Systems VPN client, see the following
URL: http://www.cisco.com/en/US/products/sw/secursw/ps2308/index.html.
If you are deploying the adaptive security appliance solely in a remote-access
VPN environment, you have completed the initial configuration. In addition, you
may want to consider performing some of the following steps.
To Do This...
Refine configuration and configure
optional and advanced features
Learn about daily operations
You can configure the adaptive security appliance for more than one application.
The following sections provide configuration procedures for other common
applications of the adaptive security appliance.
To Do This...
Configure an SSL VPN for the Cisco
AnyConnect software client
Configure a clientless (browser-based)
SSL VPN
Configure a site-to-site VPN
See...
Cisco ASA 5500 Series Configuration
Guide using the CLI
Cisco ASA 5500 Series Command
Reference
Cisco ASA 5500 Series System Log
Messages
See...
Chapter 10, "Scenario: Configuring
Connections for a Cisco AnyConnect
VPN Client"
Chapter 10, "Scenario: Configuring
Connections for a Cisco AnyConnect
VPN Client"
Chapter 12, "Scenario: Site-to-Site
VPN Configuration"
Cisco ASA 5500 Series Getting Started Guide
What to Do Next
9-17